Contents of the Complete Locking Rifle Rack SystemThe locking rifle rack system is an easy to bolt on system for GMT Rigid MOLLE Panels&comm...
Contents of the Complete Locking Rifle Rack SystemThe locking rifle rack system is an easy to bolt on system for GMT Rigid MOLLE Panels, no drilling needed. The two assemblies (locking clamp and buttstock rack) are sold separately, this kit contains both. RIGID MOLLE PANEL AND MOUNTING STRAPS NOT INCLUDED. This Locking Rifle Rack System can be added to any size Rigid MOLLE Panel. Rifle Buttstock Rack (mounting screws included)Santa Cruz SC-6 Locking Rifle Clamps (with included mounting screws, keys, and electronic release button if you wish to do a permanent button install)12V Cigarette lighter Push Button for electronic release of lock (comes wired to 12V plug-in push button with adjustable timer)Two Aluminum Backer Plates to allow easy bolt on connection of the SC-6 Locking Rifle Clamp to the Rigid MOLLE Panel, no drilling necessary.Necessary Tools for Installation (Not Included):3/16" Allen Wrench or HexPhillips Head Screw DriverLock DimensionsSelect gun lock location on your weapon that:is within min/max dimensions (0.65" - 2.60") shown in image abovelock blocks gun from moving to at least one sideCOMPATIBILITYThe SC-6 electronic release lock can clamp around the buffer tube/buttstock, Barrel or around the Forearm area of a firearm. Compatible with the following and many similar sized firearms:AR-15 and M4 Style RiflesAK-47 and AK-74 Style RiflesHunting RiflesShotgunsLocking Rifle Mount - SC-6 Installation Instructions:Contents of SC-6 Lock Backer Plate Layout for Vertical Orientation Mount Backer Plate Layout for Horizontal Orientation Mount Line up SC-6 Lock with Backer Plates Pass hex bolts through backer plate and screw into SC-6 Lock Tighten Hex Bolts with 3/16" Allen-Hex WrenchButtstock Cup Kit Installation Instructions:Use with a Buttstock Rack or a Rifle Mounting Clamp (Rubber Clamp) for additional support.RMP(TM) Buttstock Cup Kit ContentsBacker Plate Layout for Vertical Orientation MountBacker Plate Layout for Horizontal Orientation MountPass two screws through the back of the backer plates, Hold "L" Bracket up, and screw in.Pass two screws through the back of the backer plates, Hold "L" Bracket up, and screw in.Line up buttstock cup, can be mounted in three positions. Left, Right, and Center.Line up buttstock cup, can be mounted in three positions. Left, Right, and Center.Line up buttstock cup, can be mounted in three positions. Left, Right, and Center.Line up buttstock cup, can be mounted in three positions. Left, Right, and Center.When desired position of buttstock cup kit found, screw all four screws in to secure it.
